The In-Wall Basin/Bath Breech is required in the rough-in stage of your build. This product is a basin/bath breech; therefore, it is only suitable for your basin/bath.
– ABI assembly taps require an in-wall breech as they are sold separately and are dependent on the specifics of your project.
If you wish to choose the colour and style of your assembly taps later, you will need to purchase an in-wall breech and spindles. These can be purchased separately to enable you more time to decide on your finishes. You can view these here:
Once you are ready to choose your colour and style, view our assembly tap handle kits from this page here.
– Solid Brass Construction
– Handle Separation 200mm (middle wall water outlet)
Ease of Installation
Ease of Cleaning
|Dimensions (mm)||Vertical version:
260mm wide x 55mm high x 43mm deep
200mm handle separation
260mm wide x 45mm high x 43mm deep
200mm handle seperation
|What's In The Box||Breech Body|
Specification guides can be found under the Downloads tab.
|In-Wall Basin/Bath Breech - Specification|