Milani Assembly Taps – Brushed BrassSKU: 108151
The Infiniti Milani Assembly Taps are sleek, modern dials that are made using progressive cartridge technology and allow for precise temperature and pressure control.
This is an INFINITI Collection product. With this innovative design, you can switch out your handle at any time after installation for a different design or finish.
Please note the ABI Infiniti Collection is only interchangeable with certain ABI products.
- Product Information
- Product Documents
- Care Guide
- Shipping Times & Cost
|Dimensions||26.5 × 9.7 × 10.2 cm|
Brass, Ceramic Spindle (Extended Spindles Available to purchase separately)
|Finish / Coating||
(PVD) Brushed Brass – ABI’s Heat Shield – Industrial Grade Electro Colouring System (Physical Vapour Deposition)
Projection 48, Diameter 54
Hot & cold assembly taps (basin/bath spout not included)
25 years structural warranty
Our recommended care guide can be found here.
Please check all items within 14 days of receiving your order. Please do not install and email through any concerns with photographic evidence to [email protected]
All items must be returned via the original place of purchase.
For orders placed online or in store in our Burleigh Heads Showroom, please visit our Returns Portal.
QLD : 1-3 business days
NSW : 1-3 business days
VIC : 3-4 business days
ACT : 3-4 business days
SA : 5-7 business days
TAS : 5-7 business days
WA : 7-10 business days
NT : 7-10 business days
- Shipping times may differ for regional areas.
- Shipping time frames are reflective of the delivery service used.
We recommend going to the respective website for up to date delivery time frames.
Reduced Shipping Costs for all items – Australia wide
Colour samples : $9.90
0kg – 2.5kg : Light goods – $14.90
2.5kg – 5kg : Light goods – $24.90
5kg – 10kg : Standard goods – $34.90
10kg – 20kg : Heavy goods – $44.90
20kg – 30kg : Heavy goods – $54.90
30kg – 40kg : Heavy goods – $69.90
40kg – 50kg + : Heavy goods – $89.90
50kg + : Heavy goods – $99.90
Free shipping on all orders over $1000
(Excludes Vanities & Tiles)
Product weight averages
Tapware / Mixers : 1kg
Spouts / Droppers / Arms : 0.8kg
Kitchen / Laundry Sinks : 8kg
Shower Rails : 1.2kg
Shower Hoses, BP’s, Hand Shower : 0.8kg
Bottle Traps : 1.2kg
Pop-Up Wastes : 0.8kg
Basin Sinks : 8kg
Wall Hung Sinks : 30kg
(Copper & Gunmetal use ABI heat shield) All other colours use ABI’s advanced electroplating method.
With the Milani Assembly taps and spout is it possible to set out with the two taps together and then the spout to the side? Or does it have to be with the tap spout tap option as pictured – we are looking at the Brushed brass se
This can be done, however it just requires your plumber to do a little more work when he is installaing the pipes, usually if installed as per the picture there is a standard in wall fitting that your plumber will supply, if done any other way the plumber will run a outlet line to where you would like the spout positioned.Please note also that the space between the 2 taps will be around 150mm minimum
ABI’s warranty does not cover external use due to the coatings being put under much harsher conditions and UV light. However the structural integirty of the tap would be fine.